Zettex Spray bond X10
Zettex Spray bond X10 is a fast-drying universal spray adhesive for use on most construction and industry materials.
Material
SBR Rubber
Properties
- Fast drying
- Extremely powerful
- High solids content
- For universal use
- Ready to use
- DCM free
- Aerosol 500 ml
- Pressurized cylinder 17 L
Color
Transparent
Applications
For gluing all types of carpet, cork, linoleum, insulation material and rubber.
Description
Remove any moisture and grease from the surface being glued. Gently spray the contact adhesive onto both surfaces being glued. The ideal distance between the surface and the spray gun is 30 cm. Try to apply the glue in a single layer. Bring the surfaces together after 2-4 minutes and press or roller firmly. Wait at least twice as long to glue the surfaces together if the layers applied have overlapped. Check thoroughly to see whether there is sufficient contact between the glue layers if the surface is porous Apply an extra layer, if necessary.
| Features | Specification |
| Processing temperature | +5 to +40 ℃ |
| Temperature resistance | -40 to + 55°C |
| Consumption | 70-80 gram/m2 |
| Open time | 2-3 min |
| Maximum yield | 120 m2 |
| Solids | 32% |
| Color | Transparent |
| Spray pattern | WEB |
| Components number | 1 |
| Temperature resistance | -20 to 70 degrees |
| Frost resistance | According to NEN-EN 204 D2 |
| Open time | Maximum of 10 minutes |
| Amount required | Approximately 125-250 g/m2 |
| Shear strength | 110 kg/cm2 |